EdgeMax loudspeakers combine bold surface-mount performance with stealthy design to shatter the limitations of traditional in-ceiling loudspeakers. Patented PhaseGuide® technology enables EdgeMax loudspeakers to project powerful, focused sound asymmetrically from the room’s edges to the center.
New EdgeMax LP models feature an 80-degree vertical coverage angle for use in rooms with lower ceilings, and their shallow 4-inch backcan is ideal for spaces with above-ceiling limitations and tighter clearances. Larger rooms with higher SPL needs benefit from the powerful, deeper 9-inch cans and 75-degree vertical coverage of the original EdgeMax models.
EdgeMax models are purpose-built to provide specific horizontal coverage. The EM90-LP’s 90-degree horizontal coverage angle is optimized for corner placement, with wall-boundary loading providing extended bass impact.
Integrators can “mix and match” original EdgeMax and new LP loudspeakers, particularly in challenging installations with varying space dimensions and above-ceiling obstructions.
Features
- Patented PhaseGuide technology distributes sound asymmetrically throughout the space to ensure all listeners enjoy the same experience—regardless of their location
- In-ceiling installation for minimum visual impact, with fewer units required to deliver uniform sound
- High-frequency compression driver and high-excursion woofer for exceptional audio quality and power
- In-ceiling mounting along room edges and corners; purpose-built for specific horizontal coverage—90 degrees for corner placement or a wider 180 degrees—ideal for near-field and wide coverage
- Wall-boundary loading for greater bass response and performance
- 2-way passive crossover with bypassable 70/100V transformer
- Consistent voicing across the EdgeMax family
- QuickHold spring-loaded mounting system for easy installs
- Magnetically attached grille for quick access to wiring and tap settings
- Shallow 4-inch (10 cm) backcan height for rooms with above-ceiling limitations and tighter clearances
- 80-degree vertical coverage angle for use in rooms with lower ceilings
- UL 62368 and UL 2043 safety standard compliance
Specifications
- Safety Agency Ratings
- UL 62368, UL 2043
PHYSICAL
- Colors
- White (similar to RAL 9003), paintable
- Ceiling Cutout
- 345 × 345 × 100 mm (13.6 × 13.6 × 4.0 in), length × width × mounting depth
- Enclosure Material
- Engineered-plastics front baffle with integrated steel-formed enclosure
- Environmental
- Indoor only
- Grille
- Microperforated steel, powder-coated finish, paintable
- Suspension/Mounting
- (4) Quickhold spring-loaded mounting arms, (4) safety cable attachment points
- Net Weight
- 16.6 lb (7.5 kg), loudspeaker with grille (single)
- Product Dimensions (H×W×D)
- 339 mm × 339 mm × 100 mm (13.4 in × 13.4 in × 3.9 in) enclosure / 390 mm × 390 mm × 13 mm (15.4 in × 15.4 in × 0.5 in) grille flange
- Shipping Weight
- 11.0 kg (24.3 lb)
PERFORMANCE
- Frequency Range (-10 dB)
- 45 Hz – 19,000 Hz
- Coverage, Horizontal
- 90°
- Calculated Maximum SPL @ 1 m
- 110 dB continuous, 116 dB peak
- Nominal Impedance
- 8 Ω (transformer bypassed)
- Power Handling, long-term continuous
- 32W
- Power Handling, Peak
- 128W
- Recommended Signal Processing
- Recommended but not required
- Sensitivity (SPL/1 W at 1 m)
- 91 dB
- Transformer Taps, 100V
- 8 W, 16 W, 32 W, bypass
- Transformer Taps, 70V
- 4 W, 8 W, 16 W, 32 W, bypass
- Coverage, Vertical
- 80°
TRANSDUCERS
- Crossover
- 1 kHz, passive 2-way crossover with integrated 70/100V transformer
- Driver Protection
- Recommended high-pass protection 55 Hz with minimum 24-dB/octave filter
- High-Frequency
- 1 × compression driver, 1.3 in (33 mm) voice coil
- Low-Frequency
- 1 × 5.25-in (133 mm) woofer, 1.5-in (38 mm) voice coil