All Ferrum HYPSOS Open-Box units are tested, inspected and cleaned and are sold in like-new condition.
Feature Highlights
Hybrid Power System
Linear/switching hybrid design to get the advantages from both techniques - low ripple and noise as well as fast transient response and high efficiency.
Distinct user levels
Using pre-configured settings from the list of supported devices or setting custom parameters manually. Wide continuous output voltage range of 5-30V with up to 6A of current delivered to the load. HYPSOS is as universal a device as it gets.
Sweet Spot Tuning (SST)
Possibility to fine tune the output voltage for the best sound. The voltage level can be safely adjusted on the fly to allow easy comparison testing.
4T Sensing Design (4TSD)
Ensuring the exact voltage level precisely at the point of the powered device DC input terminal - special cable design and feedback to ensure flat voltage at every moment. This technique eliminates the harmful effects of the cable's resistance effectively improving transient response.
Advanced Automation
Compatibility with Apple TV remote, Trigger in/out connector; possibility to automate power-up of the devices with standby mode even without dedicated trigger connection.
Extremely safe to use
Automatic Transformer Voltage Adjust (ATVA), Electronic Output Voltage Polarity Switch and overvoltage, current limit and short protection. Settings lock to prevent accidental change of the parameters.
Detailed and revealing yet unfatiguing sound
Makes your current audio setup perform to its potential. Tweak the sound modifying the voltage level on the fly and use the preferred combination of the 4-Terminal Sensing and Spread Spectrum Mode settings.
Works with a wide variety of components!
- Voltage Compatibility: 100-240Vac/50-60Hz (Multi-Region)
- Power Inlet: Standard 15A IEC
- Power Filtration: Two-stage EMI filter
- Mains cable: US (included)
- DC Output Cable: 5×2.5mm DC plug / 5×2.1mm DC plug Custom cables made to order at additional cost
- Output Voltage Range: From 5VDC to 30VDC
- Max Continuous Output Current: 6A (up to 13.3VDC)
- Max Continuous Output Current: 80W (Voltages above 13.3VDC)
- Maximum Impulse Current: 9A
- Maximum Impulse Power: 270W @ 30V
- Dimensions (WDH): 8.6x8.1x2.0 (not including knob, connectors etc)
- Weight: 6.2 Lbs
- Primary Fuse: 250V, 5x20mm, 3.15A, Slow Blow
- Secondary winding fuse: Littefuse 154004T, 4A
Feature Highlights
Hybrid Power System
Linear/switching hybrid design to get the advantages from both techniques - low ripple and noise as well as fast transient response and high efficiency.
Distinct user levels
Using pre-configured settings from the list of supported devices or setting custom parameters manually. Wide continuous output voltage range of 5-30V with up to 6A of current delivered to the load. HYPSOS is as universal a device as it gets.
Sweet Spot Tuning (SST)
Possibility to fine tune the output voltage for the best sound. The voltage level can be safely adjusted on the fly to allow easy comparison testing.
4T Sensing Design (4TSD)
Ensuring the exact voltage level precisely at the point of the powered device DC input terminal - special cable design and feedback to ensure flat voltage at every moment. This technique eliminates the harmful effects of the cable's resistance effectively improving transient response.
Advanced Automation
Compatibility with Apple TV remote, Trigger in/out connector; possibility to automate power-up of the devices with standby mode even without dedicated trigger connection.
Extremely safe to use
Automatic Transformer Voltage Adjust (ATVA), Electronic Output Voltage Polarity Switch and overvoltage, current limit and short protection. Settings lock to prevent accidental change of the parameters.
Detailed and revealing yet unfatiguing sound
Makes your current audio setup perform to its potential. Tweak the sound modifying the voltage level on the fly and use the preferred combination of the 4-Terminal Sensing and Spread Spectrum Mode settings.
- Voltage Compatibility: 100-240Vac/50-60Hz (Multi-Region)
- Power Inlet: Standard 15A IEC
- Power Filtration: Two-stage EMI filter
- Mains cable: US (included)
- DC Output Cable: 5×2.5mm DC plug / 5×2.1mm DC plug Custom cables made to order at additional cost
- Output Voltage Range: From 5VDC to 30VDC
- Max Continuous Output Current: 6A (up to 13.3VDC)
- Max Continuous Output Current: 80W (Voltages above 13.3VDC)
- Maximum Impulse Current: 9A
- Maximum Impulse Power: 270W @ 30V
- Dimensions (WDH): 8.6x8.1x2.0 (not including knob, connectors etc)
- Weight: 6.2 Lbs
- Primary Fuse: 250V, 5x20mm, 3.15A, Slow Blow
- Secondary winding fuse: Littefuse 154004T, 4A