The ANI22 Audio Network Interface from Shure is designed to bring up to two line/mic signals onto or from a Dante network. It can be utilized for easy audio routing and convenient browser-based remote control. In addition, it is built with analog block connectors.
Features
- For Conferencing Applications
- Analog Block Connectors
- Converts 2 Mic/Line Signals to Dante
- Power over Ethernet (PoE)
- Compact Form Factor, Mounts Easily
Specifications
| Inputs (Analog) |
2 x 6-pin block connectors
|
| Outputs (Analog) |
2 x 3-pin block connectors
|
| Dante Connection |
1 x RJ45
Channel Count: 2 inputs, 2 outputs
|
| Polarity |
Non-inverting, any input to any output
|
| Power Requirements |
Power over Ethernet (PoE), Class 0 (PoE Plus compatible)
|
| Power Consumption |
11 W maximum
|
| Application Control |
HTML5
|
| Operating Temperature Range |
20 to 104°F (-6.7 to 40°C)
|
| Storage Temperature Range |
20 to 165°F (-29 to 74°C)
|
| Thermal Dissipation |
Maximum: 12.1 W (41.3 BTU/hr)
Typical: 9.8 W (33.7 BTU/hr)
|
Audio
| Frequency Response |
20 Hz to 20 kHz ±1 dB
|
| Dante Audio Flows |
Sampling Rate: 24-bit/48 kHz
|
| Latency |
Does not include Dante latency
Analog to Dante: 0.35 ms
Dante to Analog: 0.71 ms
|
| Analog Gain Range |
51 dB (adjustable in 3 dB steps)
|
| Dynamic Range |
113 dB, 20 Hz to 20 kHz, A-weighted, typical
|
| Equivalent Input Noise |
20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms
Analog Gain Setting = +0 dB, -93 dBV
Analog Gain Setting = +27 dB, -119 dBV
Analog Gain Settings = +51 dB, -130 dBV
|
| Total Harmonic Distortion (THD) |
<0.05% @ 1 kHz, 0 dBV input, 0 dB analog gain
|
| Common Mode Rejection Ratio |
>70 dB, 50 Ohms balanced source @ 1 kHz
|
| Input Impedance |
5 kOhms
|
| Output Impedance |
150 Ohms
|
| Input Clipping Level |
Analog Gain Setting = +0 dB, +20 dBV
Analog Gain Setting = +27 dB, -7 dBV
Analog Gain Setting = +51 dB, -31 dBV
|
| Analog Output Levels |
Selectable Line 0 dB
Aux -20 dB
Mic -46 dB
|
| Digital Signal Processing (DSP) |
Per Channel: Equalizer (4-band Parametric, Dante channels only), Mute, Limiter, Gain (140 dB range)
System: Channel Summing
|
| Networking |
Cat 5e or higher (shielded cable recommended)
|
| Dimensions |
1.6 x 5.5 x 5.0" (4 x 14 x 12.8 cm)
|
| Weight |
1.5 lb (672 g)
|
Packaging Info
| Package Weight |
2.7 lb
|
| Box Dimensions (LxWxH) |
10.1 x 6.6 x 3.3"
|
