Shure MXCWAPT-B Access Point Receiver

The MXCWAPT-B Access Point Receiver from Shure is a hub for the Microflex Complete Wireless Conference System designed to operate in Canada and Mexico. It can be used to manage audio routing, frequency coordination, and system control for up to 125 wireless conference units.

The MXCWPT-B scans the 2.4 and 5 GHz frequency bands and identifies the clearest channel. It then conveys that information to the conference units. The system takes advantage of limited-access DFS spectrum to expand the number of available channels. If a conflict is identified, the Access Point instructs all conference units to change channels. It features AES-128 encryption for enhanced privacy.

Furthermore, this Access Point includes a Dante networked audio connection that supports up to 10 input and 10 output channels. Analog XLR audio input and output allow for connection of a wireless microphone for a presenter or an external sound reinforcement system for an audience.

The MXCWAPT-B includes an information display and controls for basic system configuration without a laptop. It is powered by a standard PoE switch or power injector. Finally, it can be mounted on the wall or ceiling with the included mounting bracket and paintable cover or placed on a table for temporary meetings.

Features

Manages Audio, Routing, and Frequencies
Controls up to 125 Wireless Units
Selects Clearest Channel in 2.4 or 5 GHz
Switches Channels to Avoid Interference
Analog and Dante Inputs and Outputs
PoE Power
Includes Wall/Ceiling Mounting Plate

Specifications

Maximum Input Level	24.9 dBV (1% THD+N. Measured at Dante Output. Line Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB) 10.3 dBV (1% THD+N. Measured at Dante Output. Aux Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB)
Frequency Response	22 Hz to 20 kHz (+0.5 dB/-3 dB, Measured at Dante Output. -6 dBFS Input, Line Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB) 22 Hz to 20 kHz (+0.5 dB/-3 dB, Measured at Dante Output. -6 dBFS Input, Aux Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB)
Total Harmonic Distortion/Noise	0.03%, Typical (Measured at Dante Output. -6 dBFS Input, 1 kHz, Line Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW) 0.02%, Typical (Measured at Dante Output. -6 dBFS Input, 1 kHz, Aux Level, AnalogInput Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW)
Dynamic Range	115 dB [A-Weighted, 113 dB (Unweighted), Typical Measured at Dante Output. Line Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW] 112 dB [A-Weighted, 110 dB (Unweighted), Typical Measured at Dante Output. Aux Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW]
Equivalent Input Noise	Preamplifier -92 dBV (A-Weighted, Typical Line Level, Analog Input Gain = 0 dB, 22 Hz to 22 kHz BW) -104 dBV (A-Weighted, Typical Aux Level, Analog Input Gain = 0 dB, 22 Hz to 22 kHz BW)
Connector Type	XLR-3-Pin Female (Pin 1 = Ground, Pin 2 = Audio +, Pin 3 = Audio -)

Analog Audio Outputs

Maximum Output Level	4.3 dBV (1% THD+N. Audio Injected at Dante Input. Dante Input Gain = 0 dB, Analog Output Gain = 0 dB)
Frequency Response	1 Hz to 20 kHz (+0.5 dB/-3 dB) Audio Injected at Dante Input. -6 dBFS input, Dante Input Gain = 0 dB, Analog Output Gain = 0 dB
Total Harmonic Distortion/Noise	0.01% (Typical, Audio Injected at Dante Input. -6 dBFS input, 1 kHz, Dante Input Gain = 0 dB, Analog Output Gain = 0 dB, 22 Hz to 22 kHz BW)
Dynamic Range (Typical)	100 dB [A-Weighted, 97 dB (Unweighted), Typical Audio Injected at Dante Input. Dante Input Gain = 0 dB, Analog Output Gain = 0 dB, 22 Hz to 22 kHz BW]
Load Impedance	>600 Ohms, Typical
Connector Type	3-Pin XLR Male [Standard XLR Pinout (Pin 1 = Ground, Pin 2 = Audio +, Pin 3 = Audio -]
Ground Lift	XLR GND Lift Switch Position - "Left (Pin 1-GND Connected) Right (Pin 1-GND Disconnected)"
Equivalent Noise Level	-104 dBV [A-Weighted, Typical Aux Level, Analog Input Gain = 0 dB, 22 Hz to 22 kHz BW] Input Impedance 10 Kilohms Line Level
Input Impedance	10 Kilohms, Line Level 12 Kilohms, Aux Level
Configuration	Balanced

RF Specification

IEEE WLAN Standard	IEEE 802.11 a, g
Frequency Bands	2.4 GHz ISM , 5 GHz UNII
Sensitivity	-80 dBm at 10% PER
RF Output Power	1 mW (Low), 5 mW (Medium), 13 mW (High), 25 mW (Maximum)
Antenna Type	Proprietary Internal Bi-Level Dual-Band (PIFA), Patent Pending

Power

Supply Type	Power over Ethernet (PoE) 802.2 af, Class 0 PD
Supply Voltage	37 to 57 V
Power Consumption	12.95 W Maximum , 6.5 W Typical

Network

Interface	Gigabit Ethernet, Dante Digital Audio
Link	Speed: 10/100/1000 Mb/s
Network Addressing Capability	DHCP or Manual IP Address
Cable Length	328' / 100 m Maximum
Cable Type	Cat 5e or Higher

Display

Type	Monochrome FFSTN LCD
Display Size	1.84 x 0.074" / 46.7 x 18.8 mm
Display Resolution	152 x 78 (78 ppi)

General

Housing	Molded Plastic , Die-Cast Aluminum
Mounting	Ceiling Bracket or Wall
Operating Temperature Range	19.4 to 120.2° F / 7 to 49° C
Storage Temperature	-20.2 to 140° F / -29 to 60° C
Dimensions	1.88 x 9.55 x 9.52" / 47.8 x 242.5 x 241.8 mm
Weight	2.54 lb / 1.15 kg