Shure ULXD1-G50 VHF Wireless Bodypack Transmitter G50 Frequency
The Shure ULXD1 VHF Wireless Bodypack Transmitter is a lavalier, headworn microphone and instrument transmitter for hands-free wireless microphone and instrument operation (microphones and instrument cables sold separately). The ULXD1 is sold as part of the ULX-D Digital Wireless Microphone System, or may be purchased separately and used with an existing ULXD4 digital wireless receiver.
The compact bodypack transmitter features a rugged metal housing, TA4-M (4-pin male) audio input, comprehensive LCD display and much more. The ULXD1 features pristine, compandor-free digital transmission for uncompromising sound quality, range and detail. Its 256-bit encryption keeps wireless transmissions secure, and its adjustable RF output power delivers maximum range wherever necessary. The ULXD1 operates on either alkaline AA batteries or Li-Ion rechargeable batteries for up to 12 hours.
Features
- AES 256-bit encryption for applications requiring secure data transmission
- Proprietary Shure gain ranging optimizes the system's dynamic range for any input source, eliminating the need for transmitter gain adjustments
- Shure SB900 Lithium-Ion rechargeable battery provides up to 12 hours of battery life, precision metering with 5-segment battery fuel gauge, and zero memory effect
- External charging contacts for docked charging (with the SBC200 dual docking charger)
- Backlit LCD with easy to navigate menu and controls
- Rugged metal construction
- Detachable 1/4 wave antenna
- Frequency and power lockout
Specifications
- Connector TA4F connector
- Unbalanced
- 1 MOhm
- Impedance 50 Ohms
- Operating Range 300' (100 m)
- Gain Range 0 to 21 dB (in 3 dB steps)
- Line Max Input Level Pad Off: 8.5 dBV (7.5 Vpp)
- Pad On: 20.5 dBV (30 Vpp)
- EIN Preamplifier Equivalent Input Noise (EIN), System Gain Setting = +20: 120 dBV, A-weighted, typical
- RF Output SMA
- Antenna 1/4 wave
- Bandwidth Occupied Bandwidth: < 200 kHz
- Modulation Shure Proprietary Digital
- Output Power 1 mW, 10 mW, 20 mW
- Frequency Response 20 Hz to 20 kHz (±1 dB), flat
- Note: Dependent on microphone type
- Battery Shure SB900 Rechargeable Li-Ion or AA batteries
- Battery Runtime @ 10 mW:
- Shure SB900: > 12 hours
- Alkaline: 11 hours
- Housing Cast aluminum
- Dimensions (HxWxD) 3.4 x 2.6 x 0.9" (86 x 66 x 23 mm)
- Weight 142 g (5.0 oz), without batteries
- Package Weight 0.95 lb
- Box Dimensions (LxWxH) 12.7 x 4.8 x 3.4"
Shure ULXD4-G50 Digital Wireless Receiver Frequency G50
The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D® Digital Wireless Systems.
With an expansive set of professional features, including 24-bit / 48 kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX Digital offers uncompromising wireless tailored for professional sound reinforcement.
Specifications
- Predictive switching diversity
- High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
- Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
- Interference detection and alerts provided on both the receiver and Wireless Workbench® 6
- Front panel gain adjustment buttons provide up to 60 dB additional gain
- AES 256-bit encryption-enabled for applications where secure transmission is needed
- Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench® 6 integration, and AMX/Crestron control
- Support for frequency coordination with the Axient® Spectrum Manager
- Yamaha® device ID allows simplified channel patching on CL consoles
- Rugged metal chassis
- Intuitive front panel LCD menu and controls with lockout feature
- Upgraded LCD with adjustable contrast and brightness
- Audio and RF LED meters with peak indicator
- Remoteable ½ wave antennas
- Furnished rack hardware
Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
Shure WL184 Supercardioid Condenser Lavalier Mic
Recommended for sound reinforcement applications requiring high rejection of ambient noise and narrow pickup angle, the WL184 is a supercardioid lavalier microphone with a 115 degree pickup angle. It has a 1.2 meter (4 ft.) cable terminated with a miniature 4-pin mini connector. Included tie clip can be rotated in 90 degree intervals for placement flexibility. Use of windscreen highly recommended.
Feature CommShield® Technology, which guards against interference from cellular RF devices and digital bodypack transmitter
Features
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Interchangeable cartridges that provide an optimal choice for each application
- Rotatable tie-clip that pivots in 90 degree increments for placement flexibility
- Supplied snap-fit foam windscreen that controls breath noise and stays on securely
- Supplied dual tie clip holds two microphones for dual miking applications